The Operatives

From Freemasonry Wiki
Masons dress stone in the foreground while other workers build a wall and Solomon watches from a balcony.
Jean Fouquet imagined Solomon’s Temple as a building site of his own day, about 1465. The men dressing stone below and those laying it above illustrate two jobs the Operatives distinguish in their ceremonies. Bibliothèque nationale de France, Français 247, fol. 163r.

The Operatives is the usual name of the Worshipful Society of Free Masons, Rough Masons, Wallers, Slaters, Paviors, Plaisterers and Bricklayers. Its seven degrees follow the building of Solomon’s Temple from the stone yard to the setting out of the whole building. The candidate has two parts. He is the mason learning his trade, and he is the stone being shaped, tested and fitted beside its neighbours. In England and Wales, entry requires a Master Mason who is also a Mark Master Mason and a Companion of the Holy Royal Arch.[1][2][3]

The present Society can be traced to a London meeting in 1913. Medieval records document apprenticeships, the division of labour and the use of geometry on building sites. Whether the Society’s seven ceremonies descended through a continuous line of medieval guild lodges is a separate historical question.[4][5]

The seven degrees

A local body is an Assemblage. In the first three degrees its members work in an imagined stone yard. In the fourth the scene moves to the erection site, where the prepared stones have to fit. The remaining degrees ask who inspects the work, who directs it and who lays down the plan. These are the Society’s own grades. A Craft Master Mason begins here as an Apprentice.[1]

I. Indentured Apprentice

The applicant comes to the yard to learn stonework and signs an indenture, the agreement that binds him to his apprenticeship. His task is to rough-hew a block, leaving a little stone for the next worker to remove. Cutting too far would spoil the block before the Fellow could finish it. The rough ashlar, or worked block, gives the Apprentice a measure for his own conduct. His first promise is to accept teaching and do work on which another person can rely.[6][3]

II. Fellow of the Craft

The Apprentice receives his cancelled bond and may work as a Fellow. He dresses the ashlar to its finished size. The square tests a right angle, the level the horizontal and the plumb-rule the vertical. Then a square frame passes over the candidate himself. The point of making him a “living stone” is especially clear here. The man who judges a piece of work by a common standard agrees to be measured by it himself.[3]

III. Fitter and Marker

The Fitter and Marker, also called a Super Fellow, matches the dressed stones to their neighbours against a plan, then marks and numbers them for the workers who will erect them. The candidate presents a finished stone for inspection and registers his own mark. One mark answers “Who made this?” A position mark answers “Where does it go?” The distinction matters when different hands cut the stone and lay it. The ceremony invokes 1 Kings 6:7, in which the stones arrive at the Temple already prepared.[7]

IV. Setter Erector

At the building site the Setter Erectors lay a course, a horizontal row of stones, and check it from the corner. A fault there would throw the rest of the wall out of line. The ceremony also tells of two pieces sent to the wrong yards. The builders need the great corner stone for the wall and the keystone for the arch. Both turn up once their proper destinations are understood. A Mark Mason will recognise the theme of the rejected stone. Here the mistake shows how even good workmanship can be wasted when the people fitting and setting the stones misunderstand one another.[8]

V. Intendent, Overseer, Super Intendent and Warden

These are supervisory responsibilities within one degree. The Setter Erector seeks promotion to foreman. He must be able to inspect material, reject faulty work and judge the workers he directs. The ritual associates him with an elbow-shaped corner stone that helps bond one course to the next. At the yard he answered for his own block. As an overseer, his decision to pass a fault can affect everyone who builds above it.[9][10]

VI. Passed Master

The Passed Master must be able to draw designs, direct the lodges at work and see that the fabric rises according to the plan laid down for it. The ritual changes what the candidate represents. He now stands for the ground plan itself. He has to understand the proportions of the whole building and how successive courses bond, so that a joint in one course does not run straight through the next. Passed Master is the Society’s title. Installation as Master of a Craft lodge and of a Mark lodge are prior qualifications for this degree.[10][2]

VII. Master Mason

The seventh degree concerns the setting out of the foundation and the authority under which the building proceeds. Three serving Grand Master Masons preside over the Society. In Thomas Carr’s account they represent King Solomon, Hiram, king of Tyre, and the master craftsman Hiram Abiff. The first two figures distinguish the king who commissions the work from the ally who supplies it. The third represents the skill needed to carry it out. The Society’s annual drama commemorates the loss of Hiram and brings the third Grand Master’s tenure to an end. The title Master Mason here denotes the Society’s highest grade. Appointment to one of its three governing offices is a further distinction.[11][1][10]

Who can join in England and Wales?

A candidate must be in good standing as a Craft Master Mason, a Mark Master Mason and a Royal Arch Companion. He may ask a member of the Society about joining. Members may recommend him for invitation, and the Assemblage votes on his application by ballot. A present-day stonemason would need the same Masonic memberships as any other applicant.[1][2]

Progression depends on merit and prescribed intervals of service. A member can advance as far as V without having chaired a lodge. To go on to VI he must have been installed as Master in both Craft and Mark, and at least 48 weeks must have elapsed since his promotion to V. Advancement from VI to VII lies solely with the three Grand Master Masons. The Society’s overview also lists the honorary designation Grand Master Honoris Causa at VII. For its place among the English and Welsh orders, see the Appendant Degrees map.[1][2]

Medieval stonemasons and the modern Society

What a medieval building trade required. In 1356 the City of London acted after a dispute between masons who hewed stone and those who laid or set it. Six representatives of each group helped frame the regulations. An apprentice was to serve at least seven years. A mason who took a contract for a whole job had to produce experienced tradesmen prepared to vouch for him and, under stated conditions, finish the work if he failed. The document makes the economic stakes of an overseer’s judgement unusually clear. A bad decision could leave other people liable for an unfinished building.[5]

Evidence also survives in stone. A slab from the thirteenth-century Hospital of St John the Evangelist in Cambridge carries an incised design for a window. A mason worked out its form on material at hand. Full-scale details on tracing floors and templates allowed a workshop to reproduce shapes across many separate stones. This is a practical counterpart to the Fitter and Marker’s task. The slab and the London ordinance give evidence for design and trade regulation in particular places. Neither records initiations through the Society’s seven degrees.[12][5]

What can be traced to the modern founders. In 1909 the Leicester engineer Clement E. Stretton lectured on what he believed to be the surviving traditions of guild masons. His lectures and publications give us his account of that inheritance. Thomas Carr described the ceremonies, including the seven grades. Both men took part in the movement they were describing. On 21 May 1913 Carr convened a lodge at Bedford House in London under Stretton’s authority. The Society’s history reproduces the resolution of 14 April 1915 adopting the name Channel Row Assemblage, and the resolution of 19 October 1931 establishing a Grand Assemblage.[13][11][4]

The Society describes its purpose as preserving a memorial to the old operative masons. It uses their materials, skills and vocabulary to teach Freemasons who already belong to Craft, Mark and Royal Arch. The London resolutions identify the people, dates and decisions that gave the present Society its institutional form. The claim that its founders inherited all seven degrees through an unbroken succession of guild lodges goes beyond the surviving evidence.[1][4] See also Operative and speculative Freemasonry and The Old Charges.

A stonemason’s work today

In St William: Crafting a Legacy, York Minster stonemason Freya welcomes a visitor to the workshop and explains how the team combines older ways of working stone with modern techniques. Watch the film with York Minster’s account of the visit.

References

  1. ↑ 1.0 1.1 1.2 1.3 1.4 1.5 The Operatives, About the Society and An overview of the Order.
  2. ↑ 2.0 2.1 2.2 2.3 Provincial Grand Lodge of Bedfordshire, The Operatives, on the seven degrees, assemblies and qualifications.
  3. ↑ 3.0 3.1 3.2 Fellow of the Craft, published working of the second degree, reproduced by Stichting Argus.
  4. ↑ 4.0 4.1 4.2 The Operatives, Early history, including the Society’s account of the London meeting and the resolutions of 1915 and 1931.
  5. ↑ 5.0 5.1 5.2 The London Regulations for the Trade of Masons of 1356, in translation, Columbia University, Media Center for Art History.
  6. ↑ Indentured Apprentice, published working of the first degree, especially the application and signing of the indenture.
  7. ↑ Super Fellow Fitter and Marker, published working of the third degree, especially the plan, the inspection and registration of the mark.
  8. ↑ Super Fellow Setter Erector, published working of the fourth degree, on testing the course and recovering the two stones.
  9. ↑ Intendent, Overseer, Super Intendent and Warden, published working of the fifth degree, on the foreman’s examination and charge.
  10. ↑ 10.0 10.1 10.2 Passed Master, published working of the sixth degree, especially the explanation of the stones, ground plan and bonding of courses.
  11. ↑ 11.0 11.1 Thomas Carr, The Ritual of the Operative Free Masons, chapters on the seventh degree and the annual ceremonies. Carr was a participant in the formation of the modern Society.
  12. ↑ History of Science Museum, University of Oxford, Medieval Drawing, Compass and Rule, with the Cambridge window design.
  13. ↑ Bernard Dat, Stretton’s “Operative” Masonry: Legacy or Forgery?, trans. Michael Taylor, opening discussion of the 1909 lecture and pamphlet. See also Stretton’s own contributions to the Leicester Lodge of Research, Transactions, 1911–12.
Explore the Freemasonry Wiki: Full article index · All articles · All categories · Random article